New Student Housing and Dining

previousnext

Project summary

The Student Housing and Dining project encompasses two new buildings on campus, and is the largest capital project (over 32,000 m² of gross floor area) in UVic’s history. The new buildings provide 783 total student spaces, with 398 beds for students Čeqʷəŋín ʔéʔləŋ (Cheko’nien House). In addition to student housing, Čeqʷəŋín ʔéʔləŋ (Cheko’nien House) features the Cove dining hall that is open to the entire campus community. Sŋéqə ʔéʔləŋ (Sngequ House) provides 385 student beds, two 225-seat classrooms, and an Indigenous student lounge and meeting rooms.

The project demonstrates UVic’s commitment to climate action and sustainability. Design and construction of the new buildings meet Leadership in Energy and Environmental Design (LEED) V4 Gold and Passive House standards, the most rigorous global building standards for sustainability and energy efficiency. Passive House design principles aim to reduce energy consumption, GHG emissions, maintenance costs, and replacement costs by investing in a higher performing building envelope.

Read the full Case Study.

The project includes a new plaza between the buildings – connected to the Campus Greenway – will include a stormwater retention pond, seating areas and Indigenous plantings. The stormwater retention pond includes a capacity of 180,000 litres of water.

To learn more about Indigenous building names, click here.

Spirit of place

• Elders from the Songhees and Esquimalt Nations have guided the project team in incorporating Indigenous design elements and teachings.
• An Indigenous student lounge will be available in Sŋéqə ʔéʔləŋ (Sngequ House) when it opens.
• Indigenous artwork will be featured in both buildings.
• Paving on the campus greenway to the south of Čeqʷəŋín ʔéʔləŋ (Cheko’nien House) features a weaving pattern, and lights along the greenway will also project a Coast Salish design. 

Highlighted green building features

• Passive House design principles aim to reduce energy consumption, greenhouse gas emissions, maintenance and replacement costs by investing in a higher-performing building envelope.
• Use of mass timber as a key component of the building construction to reduce carbon footprint.
• Electrified kitchen in Čeqʷəŋín ʔéʔləŋ (Cheko’nien House) to reduce overall GHG emissions by 80% compared to natural gas.
• Triple glazed windows with strategic solar shading, and automatically open to keep the inside temperature comfortable.
• Heat recovery ventilation to reduce the need for space heating.
• Electric air source heat pumps and other measures to reduce GHGs for hot water heating by 88%.
• Trained dining hall staff responsible for sorting, composting, and recycling all waste, without a garbage can in view.
• A new Campus Greenway is being extended between the two new buildings and as far as Parking Lot 5. 

Innovation: pushing the boundaries of Passive House

The new dining hall sets an exemplary precedent as it is the largest commercial kitchen in North America designed in a Passive House building.

By adopting a robust energy reduction strategy and using electric kitchen equipment (rather than the industry standard gas-based equipment), this kitchen is five to six times more energy efficient than conventional commercial kitchens – and decreases projected GHG emissions by 80% for the entire building.

With a challenge of 8,700 meals per day requiring 27,750 litres of domestic hot water (DHW) per day, the new dining facility was designed to use waste heat from the refrigeration system, kitchen exhaust, dishwashers waste water heat recovery, and shower drain water heat recovery in order to pre-heat DHW. 

The high-performance envelope and efficient building systems of a Passive House project innately provides a degree of resilience to a warming climate.

Why LEED?

Why is the LEED plaque everywhere? Because LEED works.

LEED-certified buildings save energy and water, decrease operating costs, generate less waste, and foster healthier indoor environments for the people who live, visit and work within them. Leadership in Energy and Environmental Design (commonly referred to as LEED), is an international third-party certification program developed by industry leaders and is based on energy and environmental principles and best practices. It is the most well known green building certification system.

Why Passive House?

Guided by UVic’s Campus Plan and Climate and Sustainability Action Plans, the new Student Housing and Dining Project is the first significant capital project since the Campus Plan was renewed in 2016.

The project builds on the ideas generated through the Campus Plan to achieve the University’s vision of not only an extraordinary academic environment but also a vibrant and sustainable community that nurtures student experience and well-being. UVic has a deep commitment to climate action and greenhouse gas mitigation and has established the goal of reducing the campus’s greenhouse gas emissions while constructing, renovating, maintaining and operating campus buildings and infrastructure. This requires pursuing leading edge energy reduction and conservation strategies such as Passive House.

In a Passive House building, internal air temperature is consistent, as a result, it is more comfortable than a building where the inside temperatures oscillate between sweltering and freezing. The air quality is also be exceptional, eliminating any stale air or fumes.

Myth-busting

Videos

For further information contact Mike Wilson, Director – Campus Planning and Sustainability at 250-472-5433 or planning@uvic.ca