William Stokes
- B.Sc. (University of Victoria, 2024)
Topic
Development of In-Situ Plasma Processing Procedures with the Fundamental Passband on 1.3 GHz Multi-Cell SRF Cavities at TRIUMF
Department of Physics and Astronomy
Date & location
- Thursday, December 3, 2026
- 1:00 P.M.
- Clearihue Building, Room B017
Examining Committee
Supervisory Committee
- Dr. Tobias Junginger, Department of Physics and Astronomy, University of Victoria (Co-Supervisor)
- Prof. Bob Laxdal, Department of Physics and Astronomy, UVic (Co-Supervisor)
External Examiner
- Dr. David Longuevergne, Accelerator Department, Laboratoire de Physique des 2 Infinis Irène Joliot-Curie
Chair of Oral Examination
- Dr. Raad Nashmi, Department of Biology, UVic
Abstract
The ARIEL eLINAC is a 30MeV, 3.3mA superconducting electron accelerator at TRIUMF that drives rare isotope beam production with three 1.3 GHz 9-cell elliptical SRF cavities. Field emission from hydrocarbon contamination degrades cavity quality factor and limits accelerating gradient, threatening the required per-cavity performance. Plasma processing is an in-situ surface restoration technique for targeting hydrocarbons, and offers a mitigation strategy at warm cryomodule temperatures. This thesis develops plasma processing methodology for ARIEL cavities using an off-line copper 7-cell cavity under-coupled to replicate the warm cryomodule conditions. A circuit model for elliptical cavities was adopted to describe the RF qualities of the TM010 passband, the only modes accessible due to HOM damping in eLINAC cryomodules. Bead pull measurements have been used to explain preferential plasma ignition locations across cells. Plasma was discharged and sustained in all seven cells using fundamental modes alone, with a dual-tone excitation scheme enabling controlled translation between cells at total forward powers below 200W. Residual gas analysis confirmed hydrocarbon removal during He/O2 processing, with diminishing by-product signals over chronological trials. Frequency-tuning was shown to improve the plasma density and cleaning efficiency. Models to direct and predict the location of the plasma are presented and discussed. The results demonstrate a feasible approach for plasma processing warm eLINAC cryomodules.